 |
XSI-200D Digital Soldering Station |
|
|
XSI-200D
Digital Soldering Station |
Ultra-High Performance PID tip temperature control system accurately measures and controls the actual tip temperature in real time. Temperature Sensor is attached to the cartridge tip end, which guarantees extremely accurate temperature setting and control.
- Microprocessor control and digital compensation for pre-programmed sensor’s non-linearity. Overheat protection limits built-in.
- User-adjustable offset to correct different tip mass shape and heat transfer to tip soldering point.
- Standby made to lower tip temperature when iron is not used and to greatly extend tip life
- Accurate temperature PID control (± 1°C).
- Memory for 20-programmed temperature settings
- Lightweight and ergonomic ESD hand piece
- ESD Safe
- Metal (not plastic) solid construction for long service life
- XSI200D - Digital Soldering Base Unit
- XSI-11 - Soldering Iron
- XST-77 - Tool Holder for XSI-11 Soldering Iron
- XSI-ST - Sponge tray with sponge P/N XSP-1
| |
Technical Specifications: |
| Input Voltage |
110-120, 220-240V AC |
| Power consumption |
160 W |
| Temperature Control System |
µP PID Control |
| Soldering Iron |
Ceramic heater 24V / 60W |
| Temperature Setting Range |
Room temp.
- 842°F (450°C) |
| Insulation Resistance |
Over 1000 MOhm |
| Leakage Voltage |
Less than 0.5 mV |
| Earth Resistance |
Less than 0.3 Ohm |
| Ripple Temperature Without Load |
Less than ±1ºC |
| Weight |
3 lbs. (1,4 kg) |
| System dimensions |
3.5" x 6.5" x 6.5" (80 x 160 x
160 mm) |
| Packaged weight |
5.2 lbs. (2,4 kg) |
- XRX Series - Tips for XSI-11 Soldering Iron
