Angulated Cutters

Miniature 50º

An SMT cutter with a very small cutting head. Used for exceptionally fine cutting. Relieved for maximum accessibility. Razor Flush^® cutting edges.

Cutting Edge

These cutters are available in one cutting edge finish:

Flush

Handle Lengths

These cutters are available in two different handle lengths:

5075 - Standard handle length.

7075 - Ergonomic handle length.

CUTTING EDGE	CUTTING CAPACITY SOFT COPPER WIRE DIAMETER	STANDARD HANDLE	ERGONOMIC HANDLE
RAZOR FLUSH^®	.004"-.025" 0.10mm-0.65mm 38-22 AWG	5075	7075

Small 50º

Most popular angulated cutter. Small cutting head with relief for excellent visibility. Durability combined with fine cutting. Flush cutting edges.

Cutting Edge

These cutters are available in one cutting edge finish:

Flush

Handle Lengths

These cutters are available in two different handle lengths:

5082 - Standard handle length.

7082 - Ergonomic handle length.

CUTTING EDGE	CUTTING CAPACITY SOFT COPPER WIRE DIAMETER	STANDARD HANDLE	ERGONOMIC HANDLE
FLUSH	.008"-.030" 0.1mm-0.8mm 32-20 AWG	5082	7082

Large 50º

Largest cutting head. Robust. Excellent in cutting several leads in a single cut. Relieved for enhanced visibility. Flush cutting edges.

Cutting Edge

These cutters are available in one cutting edge finish:

Flush

Handle Lengths

These cutters are available in two different handle lengths:

5072 - Standard handle length.

7072 - Ergonomic handle length.

CUTTING EDGE	CUTTING CAPACITY SOFT COPPER WIRE DIAMETER	STANDARD HANDLE	ERGONOMIC HANDLE
RAZOR FLUSH^®	.008"-.390" 0.2mm-1mm 32-18 AWG	5072	7072

Large 50º Pointed

Large cutting edge with pointed tip. Short jaw for enhanced control. Flush cutting edges.

Cutting Edge

These cutters are available in one cutting edge finish:

Flush

Handle Lengths

These cutters are available in two different handle lengths:

5004 - Standard handle length.

7004 - Ergonomic handle length.

CUTTING EDGE	CUTTING CAPACITY SOFT COPPER WIRE DIAMETER	STANDARD HANDLE	ERGONOMIC HANDLE
FLUSH	.008"-.031" 0.2mm-0.8mm 32-20 AWG	5004	7004

Small 70º

An SMT cutter. Steep angle with a very fine cutting head allows special access. Razor Flush^® cutting edges.

Cutting Edge

These cutters are available in one cutting edge finish:

Flush

Handle Lengths

These cutters are available in two different handle lengths:

5083 - Standard handle length.

7083 - Ergonomic handle length.

CUTTING EDGE	CUTTING CAPACITY SOFT COPPER WIRE DIAMETER	STANDARD HANDLE	ERGONOMIC HANDLE
FLUSH	.008"-.025" 0.2mm-0.65mm 32-22 AWG	5083	7083

Miniature 90º

Long, very narrow jaw with miniature opposing cutting edges at end permit cutting in highly confined areas. Razor Flush^® cutting edges.

Cutting Edge

These cutters are available in one cutting edge finish:

Flush

Handle Lengths

These cutters are available in two different handle lengths:

5074 - Standard handle length.

7074 - Ergonomic handle length.

CUTTING EDGE	CUTTING CAPACITY SOFT COPPER WIRE DIAMETER	STANDARD HANDLE	ERGONOMIC HANDLE
FLUSH	.008"-.025" 0.2mm-0.65mm 32-22 AWG	5074	7074